Dr. C Venkatesh

2024

• Mohamed Yassin, Kiran Shahapurkar , Venkatesh Chenrayan. Impact and Compression behavior of Habesha Moringa/Bamboo Fiber Reinforced Epoxy Composites. Journal of natural fibers (Taylor & Francis, SCI, I.F- 3.7). https://doi.org/10.1080/15440478.2024.2311301
• Venkatesh Chenrayan, Dhanabal Palanisamy, Kalayarasan Mani, Kiran Shahapurkar, Manzoore Elahi M. Soudagar, Yasser Fouad, M A Kalam Muhammad Mahmood Ali, Muhammad Nasir Bashir. Mitigation of bio-corrosion characteristic of coronary artery stent by optimising fs- laser micromachining parameters. Heliyon (Elsevier,SCI, I.F :4). https://doi.org/10.1016/j.heliyon.2024.e28057
• Kiran Shahapurkar, S. Ramesh, Nik-Nazri Nik-Ghazali, Venkatesh Chenrayan, Kiran MC, Gangadhar Kanaginahal, Manzoore Elahi M. Soudagar, Yasser Fouad, M.A.Kalam. Influence of Habesha eggshell on the dry sliding wear behavior of epoxy composites. Biomass conversion and Biorefinery. (Springer, SCI, I.F: 4). https://link.springer.com/article/10.1007/s13399-024-05482-9
• Kiran Shahapurkar, S Ramesh, Nik-Nazri Nik-Ghazali, Gezahgn Gebremaryam, Gangadhar Kanaginahal, C Venkatesh, Manzoore Elahi M Soudagar, Yasser Fouad, MA Kalam. Tensile, compressive, and fracture behavior of Habeshian chopped banana/epoxy core sandwich woven banana composite. Biomass conversion and Biorefinery. (Springer, SCI, I.F: 4). https://link.springer.com/article/10.1007/s13399-024-05455-y
• Venkatesh Chenrayan, Gangadhar Kanaginahal, Kiran Shahapurkar, Manzoore Elahi M Soudagar, Yasser Fouad, MA Kalam. Analytical modeling and experimental estimation of the dynamic mechanical characteristics of green composite: Caesalpinia decapetala seed reinforcement. Polymer Engineering & Science. (Wiley, SCI, I.F: 3.2). http://doi.org// 10.1002/pen.26599
• Kiran Shahapurkar, Yordanos Mengistu Zelalem, Venkatesh Chenrayan, Manzoore Elahi M Soudagar, Yasser Fouad, MA Kalam, MC Kiran. Investigation on the mechanical and fracture properties of lightweight pumice epoxy composites. Polymer Engineering & Science. (Wiley, SCI, I.F: 3.2). http://doi: 10.1002/pen.26597
• Venkatesh Chenrayan, V Vaishnav, Kiran Shahapurkar, P Dhanabal, M Kalayarasan, S Raghunath, M Mano. The effect of fs-laser micromachining parameters on surface roughness, bio-corrosion and biocompatibility of nitinol. Optics & Laser Technology. (Elsevier. SCI, I.F: 5). https://doi.org/10.1016/j.optlastec.2023.110200

Year 2023

• Dhanabal, M. Kalayarasan, T.K Kavin, Venkatesh Chenrayan, Kiran Shahapurkar, H.C. Ananda murthy, Chandru Manivannan. Performance assessment of vegetable-based additive enriched cutting fluid for eco-friendly machining environment. Environmental Science and Pollution Research https://doi.org/10.1007/s11356-023-31242-9 (Springer, SCI. I.F.5.8)  
• Venkatesh Chenrayan, Gezahgn Gebremaryam,Kiran Shahapurkar, , Kalayarasan Mani, Yasser Fouad, Md. Abul Kalam, Nabisab Mujawar Mubarak, Manzoore Elahi Mo-hammad Soudagar, Bashir Suleman Abusahmin. Experimental and numerical assessment of the flexural response of banana fibre sandwich epoxy composite. Scientific reports https://doi.org/10.1038/s41598-023-45460-1 (Nature, SCI. I.F.5)
• Venkatesh Chenrayan, V. Vaishnav, Kiran Shahapurkar, P.Dhanabal, M.Kalayarasan, S.Raghunath, M.Mano. The effect of fs-laser micromachining parameters on surface roughness, bio-corrosion and biocompatibility of nitinol. Optics & Laser Technology https://doi.org/10.1016/j.optlastec.2023.110200  (Elsevier, SCI, I.F- 5.0)
• Hailemariam Biratu, Mengistu Gelaw, Kiran Shahapurkar, Venkatesh Chenrayan, Mohammed A. Alamir, Ibrahim M. Alarifi. Experimental and mathematical evaluation of dry sliding wear behaviour of Caesalpinia Decapetala epoxy composites. International Journal of Polymer Science https://doi.org/10.1155/2023/9379277 (Springer, SCIE, I.F- 2.8)
• Gezahgn Gebremaryam, Kiran Shahapurkar , Venkatesh Chenrayan, Fadi Althoey, Haitham M. Hadidi, Manzoore Elahi M. Soudagar, Vineet Tirth , Ali Algahtani, Tawfiq Al-Mughanam, Abdulaziz H. Alghtani, and H. C. Ananda Murthy. Influence of Layering Pattern, Fibre Architecture, and Alkalization on Physical, Mechanical, and Morphological Behaviour of Banana Fibre Epoxy Composites. International Journal of Polymer Science. https://doi.org/10.1155/2023/6023056 (Hindawi, SCI, I.F- 3.3 )
• Venkatesh Chenrayan, Gangadhar Kanaginahal, Kiran Shahapurkar, Chandru Manivannan, Vineet Tirth, Ali Algahtani, Hassan Alqahtani. Theoretical and experimental assessment of thermal stability of novel bio-waste Habesha eggshell particles reinforced epoxy composite. Biomass Conversion and Biorefinery https://doi.org/10.1007/s13399-023-04704-w (Springer, SCI, I.F-4.0)
• Keyredin Selman , Kiran Shahapurkar, Venkatesh Chenrayan , Mohammed A. Alamir , Ibrahim M. Alarifi , Vineet Tirth, Abdulaziz H. Alghtani, Ali Algahtani, Tawfiq Al-Mughanam. Flexural and Tensile Behavior of Kulkual fiber and TiB2 Particles Reinforced Epoxy Composites" Polymer Composites,2023; 1-13 DOI: 10.1002/pc.27386 (Wiley, SCI, I.F.-3.531)
• Mohamed Yassin , Kiran Shahapurkar , Venkatesh Chenrayan , Ibrahim M. Alarifi , Mohammed A. Alamir , Tarek M.A.A. El-Bagory. Investigation of Tensile and Flexural properties of Habesha Moringa-Bamboo Fiber Reinforced Epoxy Hybrid Composite, Polymer composites, 2023; 1-13. DOI: 10.1002/pc.27384   (Wiley, SCI, I.F.-3.531)
• Venkatesh Chenrayan, Kiran Shahapurkar, Gangadhar M Kanaginahal, Vineet Tirth, Abdulaziz H. Alghtani, Ali Algahtani, Fadi Althoey, Manzoore Elahi M Soudagar, Chandru Manivannan. “Evaluation of dynamic mechanical analysis of Crump Rubber Epoxy composites: Experimental and Empirical perspective”. Journal of the Brazilian Society of Mechanical Sciences and Engineering. (2023) 45:145 https://doi.org/10.1007/s40430-023-04033-z   (SCIE- I.F: 2.361)
• Venkatesh Chenrayan, V.Vaishnav, Kiran Shahapurkar,Chandru Manivannan, Vineet Tirth, Ibrahim M.Alarifi, Mohammed A. Alamir ,Catalin I. Pruncu, Luciano Lamberti. “Tribological performance of TiB₂-Graphene Al 7075 hybrid composite processed through squeeze casting: at room and high temperature”.TribologyInternational https://doi.org/10.1016/j.triboint.2023.108486 ( SCI- I.F: 5.62)
• Kiran Shahapurkar , Kiran MC , Mohammed A. Alamir, Vineet Tirth, Ibrahim M. Alarifi,Venkatesh Chennarayan. “Quasi-static compressive behaviour of epoxy composites reinforced with crumb rubber”. Polymers and Polymer Composites. Volume 31: 1–9. https://doi.org/10.1177/09673911231158995 (SCIE- I.F: 1.841)

Year 2022

• Venkatesh Chenrayan, Chandru Manivannan, Kiran Shahapurkar, Ankit Krishna, Vineet Tirth, Ali Algahtani, Ibrahim M. Alarifi (2022) “Machinability performance investigation of TiAlN, DLC, and CNT coated tools during turning of Difficult-to-cut Materials”, Journal of Nanomaterials. Volume 2022, Article ID 9664365, 15 pages (Hindawi, SCI, I.F.-3.791) https://doi.org/10.1155/2022/9664365
• Kalkidan Gossaye, Kiran Shahapurkar, Chenrayan Venkatesh, Ibrahim Alarifi, Vineet Tirth, Manzoore Elahi M. Soudagar, Ali Algahtani, Abdulaziz H. Alghtani (2022), “Compressive behavior of Habesha eggshell particulate reinforced epoxy composites”, Polymer Composites (Wiley, SCI, I.F.-3.531) https://doi.org/10.1002/pc.27119
• Mathimurugan, V. Vaishnav, R. Praveen Kumar, P. Boobalan, S. Nandha, Venkatesh Chenrayan, Kiran Shahapurkar, Vineet Tirth, Ibrahim M. Alarifi, Moutaz Mustafa A. Eldirderi, Khaled Mohamed Khedher and Hadee Mohammed Najm (2022) Room and High Temperature Tensile Responses of Tib2-Graphene Al 7075 Hybrid Composite Processed through Squeeze Casting”, Nanomaterials, 12(18), 3124 (MDPI, SCIE, I.F.-5.719) https://doi.org/10.3390/nano12183124
• Venkatesh Chenrayan, Chandru Manivannan, Kiran Shahapurkar, Girmachew Ashegiri Zewdu, N. Maniselvam, Ibrahim M. Alarifi, Khalid Alblalaihid, Vineet Tirth, Ali Algahtani (2022) “An experimental and empirical assessment of machining damage of hybrid glass-carbon FRP composite during abrasive water jet machining”, Journal of Materials Research and Technology, 19, 1148-1161 (Elsevier, SCI, I.F.-6.267) https://doi.org/10.1016/j.jmrt.2022.05.042
• Kiran Shahapurkar, Khalid Alblalaihid, Venkatesh Chenrayan, Abdulaziz H. Alghtani, Vineet Tirth, Ali Algahtani, Ibrahim M. Alarifi, and Kiran MC (2022) "Quasi-Static Flexural Behavior of Epoxy-Matrix-Reinforced Crump Rubber Composites", Processes 10(5), 956 (MDPI, SCIE, I.F.-3.352) https://doi.org/10.3390/pr10050956
• Khalid Alblehed, Kiran Shahapurkar, Venkatesh Chenrayan, Hailu Beyecha, Vineet Tirth, Ali Algahtani, Manzoore Elahi M. Soudagar and Vinayak Talugeri (2022) “Experimental investigation on the flexural response of epoxy composites filled with environmental pollutant crump rubber”, Materials Research Express, 9, 035503 (IOP, SCI, I.F. - 1.620), https://doi.org/10.1088/2053-1591/ac5caf
• Venkatesh Chenrayan, Vaishnav, V., Kiran Shahapurkar, Vineet Tirth, Ibrahim Alarifi, Chandru Mannivanan, and Manzoore Elahi M. Soudagar (2022) “A comprehensive analysis to assess the impact of nano MoS2 on the wear characteristic of Al-TiB2-Gr composite”, Materials Research Express, 9, 016525 (IOP, SCI, I.F. - 1.620), https://doi.org/10.1088/2053-1591/ac4c18
• V, R.Praveenkumar, Venkatesh Chenrayan. “Influence of nano MoS2particle on the mechanical and tribological properties of Al-TiB2-Gr hybrid composite”, Journal of Mechanical Science and Technology 36 (2) (2022) 857~867. (Springer, SCI, I.F. - 1.810) http://doi.org/10.1007/s12206-022-0133-

Year 2021

• Mulualem Hailu Besha, Devendra Kumar Sinha., Venkatesh, Satyam Shivam Gautam “Analysis of effective stresses for titanium alloys in continuous forming process”, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2021.02.289
• Kumar, D., Kiran Shahapurkar, Venkatesh, Muruganandhan R., Vineet Tirth, Chandru Manivannan, Ibrahim Alarifi, Manzoore Elahi M. Soudagar, Ahmed S. El-Shafay (2021) “Influence of Graphene Nano Fillers and Carbon Nano Tubes on the Mechanical and Thermal Properties of Hollow Glass Microsphere Epoxy Composites”, Processes 10(1), 40 (MDPI, SCIE, I.F. – 3.352), https://doi.org/10.3390/pr10010040
• Kiran Shahapurkar, Venkatesh Chenrayan , Belay Brehane Tesfamarium, Manzoore Elahi M. Soudagar , Nazia Hossain, Ali A. Rajhi , Sagr Alamri, Ibrahim M. Alarifi, Pavan Shahapurkar, M. A. Mujtaba, M. C. Kiran and Gulam Mohammed Sayeed Ahmed (2021) “Parametric Analysis of Epoxy/Crumb Rubber Composite by Using Taguchi—GRA Hybrid Technique composites”, Polymers, 13(19), 3441 (MDPI, SCIE, I.F. – 4.967), https://doi.org/10.3390/polym13193441
• Kiran Shahapurkar, Venkatesh, Manzoore Elahi M. Soudagar, Irfan Anjum Badruddin, Pavan Shahapurkar, Ashraf Elfasakhany, MA Mujtaba, Md Irfanul Haque Siddiqui , Masood Ashraf Ali and Teuku Meurah Indra Mahlia (2021) “Leverage of environmental pollutant crump rubber on the dry sliding wear response of epoxy composites”, Polymers, 13(17), 2894 (MDPI, SCIE, I.F. – 4.967), https://doi.org/10.3390/polym13172894
• Venkatesh Chenrayan, Chandru Manivannan, Selladurai Velappan, Kiran Shahapurkar, Manzoore Elahi M. Soudagar , Ashraf Elfasakhany, Ravinder Kumar and Catalin I. Pruncu (2021) “Experimental assessment on machinability performance of CNT and DLC coated HSS tools for hard turning”, Diamond and Related Materials 119, 108568 (Elsevier, SCIE, I.F. – 3.806), https://doi.org/10.1016/j.diamond.2021.108568
• Mohanram Parthiban, Venkatesh Chenrayan, Chandraprabhu Venkatachalam, Kiran Shahapurkar and Addisu Bekele (2021) “An experimental assisted mathematical modelling to study the desorption capacity of the clay based solid desiccant”, Materials Research Express, 8, 075501 (IOP, SCIE, I.F. 2.025) https://doi.org/10.1088/2053-1591/ac0c51
• Dessalegn Bayu Zegeye, Devendra Kumar Sinha, Venkatesh,  Anil Kumar  Pushkar Jha. Mathematical modeling and mechanical characterization through process parameters optimization of AlMg-matrix SiCp reinforced composites produced by powder metallurgy route. Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2021.03.078
• Chandru Manivannan , Selladurai Velappan ,Venkatesh Chenrayan. Multiobjective Performance Investigation of CNT Coated HSS Tool under the Response Surface Methodology Platform. Archives of Metallurgy and Materials. 66 (2021), 2, 627-635. DOI: 10.24425/amm.2021.135900 (SCIE-I.F : 0.707)
• Chandru, V. Selladurai, C. Venkatesh. Experimental evaluation of machinability performance of CNT coated HSS tool during turning of titanium alloy. Journal of Mechanical Science and Technology 35 (5) 2021. https://link.springer.com/article/10.1007/s12206-021-0430-6 (SCIE-I.F : 1.189)
• Mulualem Hailu Besha, Devendra Kumar Sinha, C. Venkatesh, Satyam Shivam Gautam. Analysis of effective stresses for titanium alloys in continuous forming process. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2021.02.289.

Year 2020

• Venkatesh Chenrayan, Mengistu Gelaw, Chandru Manivannan, Venkatesan Rajamanickam , Ellappan Venugopal. An extensive data set related to micro-drilling of Al-SiC-B 4 C hybrid composite through μECM using GRA coupled PCA. Data in Brief 33 (2020) 106491. https://doi.org/10.1016/j.dib.2020.106491.
• Aswinprasad, V.S.Sriharish, C.Venkatesh, Abdulmelik Husen Meda, N. Kamalakannan. Experimental investigation of wear characteristics of Aluminium 6063 hybrid composite reinforced with Graphite and Molybdenum di sulfide (MoS2), Materials Today: Proceedings 22 (2020) 3190–3196 Elseiver. https://doi.org/10.1016/j.matpr.2020.03.456
• Venkatesh Chenrayan, Mohanram Parthiban, Chandraprabu Venkatachalam, Mengistu Gelaw. Experimental and optimised data set for hot extrusion of B 4 C/Al 6061 composite using Taguchi coupled GRA technique, Data in Brief 29 (2020) 105389. Elseiver. https://doi.org/10.1016/j.dib.2020.105389
• Venkatesh, Mengistu Gelaw, Soloman Dufera. Optimization of Bio Degradable Nano Cutting Fluid Parameters during Machining of Titanium Alloy. International Journal of Recent Technology and Engineering  2277-3878, Volume-8 Issue-6, March 2020.

Year 2019

• Getachew Gashaw, Perumalla Janaki Ramulu, Venkatesh, “Fabrication, Characterization and Evaluation of Mechanical Properties of Aluminium Hybrid Matrix Composite (Al6063/SiC-Bagasse Fly-Ash)”. Book chapter in Advances in Computational Methods in Manufacturing (Springer), Chapter No 62, page no 743. https://doi.org/10.1007/978-981-32-9072-3.
• Bhaskaran, C. Venkatesh, Abdulmelik Husen Meda, V. Aswinprasad. “Modelling and trajectory tracking of four arm robot for inspection”. AIP Conference Proceedings 2128, 030008 (2019). https://doi.org/10.1063/1.5117951.

Year 2018 

• Bhaskaran, C.Venkatesh, Abdulmelik Husen, “Investigation of Effect of Machine Tool Vibration over the Surface Finish by Wavelet Transforms Technique”. International Journal of Applied Engineering Research ISSN 0973-4562 Volume 13, Number 17 (2018) pp. 13141-13145. https://www.ripublication.com/ijaer18/ijaerv13n17_24.pdf.
• Venkatesh, J.Bhaskaran. “Design, Development and performance evaluation of Bio Degradable nano cutting fluid”. International Journal of Nanosciences. Vol. 17, No. 5 (2018) 1850036 (7 pages). DOI: 10.1142/S0219581X18500369.

Year 2017 

• Venaktesh, N.Sundaramoorthy, V.Aswinprasad. “Optimization of process parameters of pulsed electro deposition technique for nanocrystalline nickel coating using Grey Relational Analysis (GRA)”. International Journal of Nanosciences. Vol. 16, No. 3 (2017) 1760007 (8 pages)

Year 2016

• Venkatesh, A.S.Karthi,T.Logeswaran, V.Prithivirajan,M.Santhosh. “Experimental investigation of tribological characteristics of nanocrystalline nickel protective coating developed through electro deposition technique”. Materials Today (ELSEIVER) (2016) 3121–3129.

Year 2015

• Venkatesh, M. Aravindh, K. Pridivirajkumar, Eswaramoorthy. “Investigation of Influence of Process Parameters over the Mechanical Properties and Microstructure of Friction Stir Welded Al2O3 and SiC reinforced Hybrid Aluminium composite Joints. International Journal of Applied Engineering Research, Vol 10, 24 (2015) pp- 44039-44044.

Year 2014

• Venkatesh, N.M.Arun, R.Venkatesan. Optimization of micro drilling parameters of B4C DRMM Al 6063 composite in μECM using Taguchi coupled Fuzzy Logic. Procedia Engineering 97 (2014) 975 – 985, (ELSEIVER).
• Venkatesh, R.Venkatesan. Optimization of micro drilling parameters of B4C DRMM Al 6063 composite in μECM using Taguchi coupled Fuzzy Logic. Procedia Engineering, Vol.97, 2014, pp 975-985,(ELSEIVER).
• Venkatesh, R.Venkatesan. Analytical, Numerical and Experimental approach for Design and development of optimal die profile for the cold extrusion of B4C DRMM Al 6061 composite billet into hexagonal section. Journal of Mechanical Sciences and Technology. December 2014, Volume 28, Issue 12, pp 5117-5127, SPRINGER. (SCIE- I.F: 1.819)
• Venkatesh, R.Venkatesan. Design and analysis of optimal die profile for the extrusion of round SiC DRMM Al 6061 composite billet into hexagonal section. Journal of the Brazilian Society of Mechanical Sciences and Engineering. SPRINGER. (SCIE- I.F: 2.361)
• Venkatesh, R.Venkatesan. Optimization of process parameters of hot extrusion of SiC/Al 6061 composite using Taguchi technique and upper bound technique. Journal of Materials and Manufacturing Processes, Vol.30, pp 85-92, 2015, TAYLOR & FRANCIS. (SCI- I.F: 4.783)
• Venkatesh, R.Venkatesan. Design and analysis of streamlined extrusion die for round to hexagon using area mapping technique, upper bound technique and finite element method. Journal of Mechanical Science and Technology 28 (5) (2014) 1867-1874. SPRINGER (SCIE- I.F: 1.819)

• Rewarded by the Institution of Engineers (India) for the achievement of ¾ ^th aggregate in a single attempt during the Section A Examination
• Secured University First Rank in M.E and recipient of University Gold Medal
• Recipient of the “Best Research Paper” award at the International Colloquium on Materials, Manufacturing and Metrology (ICMMM-2014) held at the Indian Institute of Technology, Madras on August 8-9.
• Recipient of the “Best Research Paper” award at the International Conference on Advances in Refractory and Reactive Metals and Alloys (ARRMA-2016) held at Baba Atomic Research Centre (BARC)
• Recipient of the “Best Project Award” at the 1st IEI Hosur Local Centre Technicians’ & Students’ Convention and National Seminar on “SHAPING TECHNICAL EDUCATION TO ADDRESS SUSTAINABILITY & GLOBAL COMPETITVENESS” held at Adhiyaman College of Engineering, Hosur.
• Received funding as a Nodal officer, Rs. 8, 28,225 to conduct skill development courses under the “PRIME MINISTER KOUSHAL VIKAS YOJNA” scheme from the National Skill Development Corporation (NSDC), Government of India.
• Received partial funding of 15,000 from Tamilnadu State Council for Science and Technology (TNSCST) based on a proposal to conduct an “Open House Exhibition on Science and Technology
• Anna University approved “Research Supervisor” for guiding research scholars with Reference No: 2620062 (Anna University, Chennai)